Resources: Official Product Page | Literature | Manual
Our X-treme Brush Cutter is the ideal attachment for tough clearing applications. It is available in cutting widths of 60″, 72″, or 78″. Equipped with bidirectional blades and powered by a high-torque motor, it features a 100 HP Omni gearbox. It requires a flow of 14–20 GPM for low flow and 20–30 GPM for mid flow. Note, the one-year warranty does not cover the blades or hoses.
X-treme Brush Cutter X-treme Brush Cutter 14-20 GPM Specs X-treme Brush Cutter 14 – 20 GPM
Our X-treme Brush Cutter is an ideal attachment for tough clearing applications. The cutter comes in a 60", 72", 78" or 84" cutting width. It is equipped with bidirectional blades, powered by a high torque motor and features a 100–hp Omni gear box. A flow of 14–20 gpm is required on the low flow, 20–30 gpm on the mid flow. The one year warranty does not cover the blades or hoses. Fourth blade option available on 72" and larger. X-treme Brush Cutter 20-30 GPM Specs 3/8” X-treme Brush Cutter 20 – 30 GPM
- 6” cutting capacity
- 3/16” deck with sides reinforced with 3/8” AR400
- 3 Bidirectional blades made with 5/8” AR400
- Does not require a case drain
- High torque Parker motor with built in relief valve
- 3/8" Double clover leaf blade holder
- 100 HP right angle gear box with 6 bolt flange
- 1/4" Deck optional upgrade
- Optional Mulching Teeth
- Motor Upgrade available to 16-26 GPM on this model
- High torque Parker motor
The CID X-treme T ree Reaper combines strength and efficiency. The Direct Drive motors provide all the power, without the restrictions of a gear box. The T ree Reaper uses a 16-26 GPM Gear motor (no case drain required) providing a 5" cutting capacity, or a 17-30 GPM Piston motor (case drain required) providing a 7" cutting capacity. This cutter features replaceable skid shoes, 3x AR400 non-welded blades, optional mulching teeth, and an optional grill. Now offering a NEW 30-48 GPM model with mulching teeth. X-treme Tree Reaper
is 72MT , and 78MT . X-treme Tree Reaper Specs Triple Bolt Single Bolt Weld must be cut to remove bolt. No welding or grinding required. Bolt must be welded after blade change. vs. X-TREME TREE REAPER BLADE ATTACHMENT X-TREME BRUSH CUTTER BLADE ATTACHMENT
- 7" Cutting Capacity
- Replaceable Skid Shoes
- Three 5/8" AR400 Blades
- Blades secured using non-
- Optional Mulching Teeth
- Three Motor Options:
- Sizes available: 60" , 72" , 78"
- Current 30-48 sizing offered